Problem With Updating Effect Values

A tiny little thing…

  1. Open Bus Compressor (or any other effect for that matter)
  2. Put 1100 on every line
  3. Play. The Compressor Threshold will now be set at -60.00 dB.
  4. Left click Threshold slider at the right-most position (setting threshold to 0.00 dB). Hold down mouse button.
  5. Release mouse button.

Result: The slider will correctly return to the left-most position (dictated by the 1100 commands). But the dB value will in most instances not be changed back to -60.00. It will incorrectly still be 0.00 dB.