Good morning, I have a problem with the Behringer modules (model d, pro 1, wasp, cat) I connected the synthesizers via USB cable. I set a different midi channel on each module. This configuration works fine on other Daw but on Renoise it doesn’t. It only recognizes one synthesizer, 3 others don’t. Has anyone had the same problem? thank you for all the information you give me, see you soon Leonardo
https://tutorials.renoise.com/wiki/MIDI
Have you followed all the steps outlined in the MIDI Out section of the Manual? It’s going to be hard for anyone to know how to assist you without knowing where the process is failing.
Are all devices plugged into hardwired ports (i.e. ports located directly on your computer)?
If plugged into a hub of some kind, are they all plugged into the same hub?
All devices are connected to a single hub.
Renoise recognizes the midi out of all 4 devices but after having set the different midi channels e.g. (pro1 on midi channel 12, model d on midi channel 14 etc.) for each synth, only one module plays. I followed all the steps in the manual.
I have Model D, Cat and Neutron connected to Renoise and everything is working perfectly. I do however use MIDI not USB for those but I have other synths connected to Renoise via USB and the setting up is very similar. Most important is to make sure that for each of the instrument MIDI settings you have selected correct USB device (it’s in the drop down menu in the MIDI Out section).
My setup process of new instrument looks like this: choose instrument slot, rename the slot to ‘Model D’ for example, go to instrument Midi settings, on left hand side in MIDI Out section choose the correct device from drop down menu (will show you all recognised USB and MIDI host devices), set up the channel or leave at ‘All channels’. done.
Hi, I configured the different modules (model d, pro 1, cat, wasp) in the back with different midi channels. All connected to a single USB hub. This setup works perfectly on other DAWs. In renoise the synths are recognized but when I set the midi channels for each sith, only one plays. Surely if I connect the instruments with the classic midi it works but I need to connect them via USB. I have been working with renoise for a few years and I know the program well. Thanks for your reply .