The Original Amiga Soundtracker Sample Disks

Archived from Aminet and currently stored on Internet Archive…


We should make a music compo using only st-01 instruments…

Awesome!! :)
Thanks a lot!

Lovely :walkman: love to listen to old ST mods… Crystal hammer,sleepwalker… pure gold ;)

A lot of the samples need to be down pitched 1 or 2 octaves (sometimes it’s a little difficult to tell)…but hey, this is the age of playing samples at the wrong pitch anyway, right?

I’m sure it’s Old News, but here’s a thread on another forum where they were tracking down all the source instruments for ST-01.

Unfortuantely, the site itself is offline.

To be clear, the forum link works fine - just the site that was going to have the remastered samples is offline, unfortunately.

But - the list of instrument sources is there! I’d love to see this project get revived, perhaps with a community editable page, ala wiki, so people could more easily upload and collaborate.

Maybe I should host one! Seriously considering it. Anyone know if there are existing ‘collaborative sample toolkit’ websites? I don’t like to reinvent the wheel or fragment communities.


Ah, sorry, noticed the first link,
Here is the 8khz tuned edition:…t-xx8192HzTuned

Here’s the st-01 samples in xrni format tuned to A-440

Other changes to the samples:

  • Trimmed to get rid of pops/clicks
  • Looped when necessary.
  • Categorized in folders.

Old thread yes, but I feel very strongly about this subject. Can anyone using the original STXX samples please turn off sample interpolation (and run your audio engine at 88.2k or above.) It pains me to hear stuff I did in FT2 with the ST samples all interpolated and smudged to hell. Gotta maintain the old school crunch!

does somebody have the gus patches also?

Will someone make a Renoise Instrument out of these…me included :ph34r:

Here’s the st-01 samples in xrni format tuned to A-440

Other changes to the samples:

  • Trimmed to get rid of pops/clicks
  • Looped when necessary.
  • Categorized in folders.

This link doesn’t seem to work anymore, could anyone who has it rehost the original xrni file?

Also, the originals unedited files are here:

In the first linked archive containing “.wav” converted files, some files where wrongly converted. In the original files, some files (like “ST-01/strings6”) were 8SVX files with a header. For these files, the header was incorrectly interpreted as sound data in the conversion process, adding a noisy attack to the original 8SVX samples. Most files in the ST-01 and ST-02 directory are raw files without header though, so probably unaffected by the conversion.

how could one convert those originals to.wav/.flac? or open in milky/renoise?

I tested the files under Renoise.
Renoise can open them.
But they seem to have a bad quality sound, are not set to C3, have no loop part, etc…
So I think that there is a very huge work to do to obtain something really satisfying…


Ok, I uploaded a new archive with all the files converted to .aiff or .wav, that Renoise can use easily.

Some original files where raw PCM with no header, some others where IFF files with a header documenting the sample rate.

The .aiff files are the raw PCM originals plus a generated header that Renoise can read, so most of these samples are now tuned in C out of the box for modern DAWs.

The .wav files are the IFF originals converted by SoX (Sound eXchange), and are as tuned as the original sample was. Except that now Renoise can read and use the sample rate from the .wav file (it could not use the IFF header in my experience).

There is an extensive in the archive, to help documenting and reviewing the conversion process, and what I have learned on the way.



Yes, Renoise can load raw PCM data, so you can load the original files and tune them (sort of).

To do that, click on the *.* button to show the files without extension. Then right click on the original sample and choose Load file with Options….

For the raw PCM files

In the dialog box choose 8 bit signed and 11025 (Renoise doesn’t propose 8363 or 16726 as sample rate, the sample rates of 90 % of the original files). Then add 7 semitones to the pitch, and the sample should be tuned: play C3 or C4 for the base note of the original.

Note: this should give you the exact same result than double clicking the .aiff converted files, without the additional semitones.

For the IFF original files

This is the remaining 44 % of the collection. The same should work with an aditional step: skip 104 header bytes in the load options. But the number of header bytes can vary, it should be four bytes after the BODY marker. You should check the header length with xxd, od, or hexedit on Linux / macOs, HexEdit or HxD on Windows.

For those, the problem is to identify that it’s an IFF file in the first place, as there are no extensions in the original files. Again, your favourite hex editor is your friend (look for the first four bytes, they should spell FORM).

And if there is a loop start info in the IFF file, you loose it.

Note: this should give you the exact same result as double clicking on the corresponding .wav converted file, without the additional semitones. You also loose the potential loop start info if present, I couldn’t find a way to preserve that.

More info

You can find more info and references in the, which is also on gist:


I think there was a quite good way using UAE emulation to convert it to wav properly, but I forgot the details. I could be even that someone in here already did that many years ago?