If i was to mono the low end elements as i go, kicks, bass, etc. Would i then need to do it again on any busses or on the master? You seem to want to isolate the bass from everything else after the fact - or is it for basses with a lot of high information? Genuinely curious, any pointers would be appreciated.
1 Like
Well, it kind of depends on how youāre working. In my case I use mono samples for my Kick and my basses, and if I want to add stereo information in the instrument FX chains, I do. Mostly by using a multiband send to isolate the mids and highs in a separate effects chain with some stereo processing, usually via reverb, or sometimes the stereo expander, or sometimes a time-based DSP unit. That way I know my low end is mono throughout the signal chain. I high pass everything else besides Kick and bass elements. So, below roughly 200 HZ everything is mono.
If youāre using vsts, itās likely easier to handle the monoing of Bass in send tracks, much as TNT has described. Check out the mixing thread for a good review of how to do this. Namely by using a stereo expander to mono the low frequencies on the side/low send track, or by eliminating them altogether
1 Like
@BriocheBaps
Itās always about monoizing the low ends of the entire song, which means usually youāre having a monoizer in your master track. But you COULD also set a monoizer in every single track like kick and bass, but that doesnāt make sense because it means more work without any improvement in comparison. So IF youāve placed a monoizer in your kick track and the low ends are monoized, then you donāt have to do it again at another place regarding the kick. Every signal ends up in the master track anyway.
Jup. Mostly below 150 Hz is recommended, but personally I prefer 200 Hz. Anyway, it has to be between 150 and 200 Hz. Itās right either way. 
2 Likes
lol yeah, iām not gonna lie, Iāve been super busy and havenāt been on the forums as much as Iāve wanted to since joining. just enough to read and learn a little, and havenāt really posted other than in these threads, unfortunatelyā¦ the only reason i even knew this MBC was going on right now is because a fortune cookie told me about it, lmao.
Also, I actually made two tracks, ill post the other in that track sharing thread sometime, but this one checks more boxes so its what im going withā¦ all samples over 3 secs, no single cycles, etc. even managed to keep the fractal in stereo, yay! (yes i know thereās no bonus points for that, but iām proud of myself for keeping it in stereo anyways, ok? lol.)
but i really appreciate your comments about the track. was going for dark and psychedelic, almost liminal sorta vibes. so, thank you, it means a lot! Everyone here has made some amazing fucking music, but iām saving my comments for voting.
2 Likes
@_kara Life can get in the way of your plans, yes. But Iām happy your fortune cookie guided you here in time for the MBC. And good job on including stereo files. Looking forward to your other track popping up someday soon.
You would think so. But alas, just adding time isnāt enough. 
1 Like
Yes, you also need the brain, but most importantly the will to do it.
Itās way more fun to compose than to mix and master, and until today I refuse getting too technical. On one hand because Iām deeply convinced there wouldnāt be any noticeable difference in terms of your sound if youāre going into too much (technical) detail, and on the other hand because itās as time-consuming as composing itself but way less fun. BUT if youāre listening to your own music on someone elseās system and your music sounds flat and soft in comparison to other music, or if you would like turn up the volume but the more you increase it the muddier and bassier gets the sound without having punch, then itās time to think about dealing with proper mixing and master. And thatās exactly the reason why Iām doing this. And of course because Renoise makes it possible. It wasnāt possible in any other tracker that Iāve used in the past. I would recommend dealing with it, itās not that hard, doesnāt take too much time to learn and itās worth the effort. There are millions of videos and articles about that topic, all you need to do is to pick out the important informations that make sense and to ignore the rest. OR just check the mixing thread. 
2 Likes
Am not sure but for me look like only 99.99993218134% full.
1 Like
I think I forgot to respond to this, but thank you for listening and I appreciate the comments. Weird is what I aim for. I will try and sit down after the deadline and listen to everyoneās and do one big review, so I donāt miss any.
1 Like
Just a friendly reminder that the deadline is this Sunday. If youāre working on something still be sure to finish it.
And if you havenāt started yet, consider it a speed challenge as well. 3 days is more than ample time. Go nuts!
@corb sure thing! Voting will start on Monday.
2 Likes
I had a blast making this track and the competition really forced me to think differently.
I went extremely experimental and tried to get all my drum sounds by using macros to switch on and off Modulation parameters on the sample.
Hereās the Soundcloud!
3 Likes
Welcome aboard StarScreem! Iām too tired right now but Iām looking forward to listening to your track in the morning.
No problem! Get some rest and let me know what you think about the set up. I am more interested in that than the song itself.
Hey guys, itās been a while since i participated in one of these but i found out about this one yesterday and the theme was interesting and the pieces so far are so good! So, i decided to rush and come up with something, barely made it in time lol. (Hope weāre indeed going with hawaii standard time 
)
Soundcloud : Stream Popshovit by Dark Clouds | Listen online for free on SoundCloud
xrns (tool says around 99.5%):
mbc16.xrns (908.3 KB)
2 Likes
Yes, Hawaii Standard Time. So about 30 hours left from the time of writing.
Iāve made a countdown clock;
When this expires the competition closes.
1 Like
I thought I was going to break my silence on the forums with this one, seems itās been more than a while. (Iād like to change my username, anybody here that could help me with that?) Anyhow, hereās wonderwall;
VilƩter - Sampleless.xrns (123.9 KB)
In all honesty I did not measure the sample usage with Martblekās tool, but Iām sure it can pass the muster since there aināt a single one of them in there.
4 Likes
Bloody Brilliant!
2 Likes
@StartScreem Your tune is bloody lovely! Tasty stuff! I am also thoroughly impressed at how many different sounds youāve managed to squeeze out of the sound of floppy disk reading and a kick drum. Your phrase and macro are impressive, too. How much time did it take for you to set it all up? Anyway, very cool!! And I enjoyed your comments on your own track. Definitely happy you didnāt abandon this track.
@Etheross welcome back! And what a triumphant return it is. I like the playful beginning. It has a cartoon horror vibe to me. But it grows into something else. Something that I like very much. Iām not sure how describe it but it conjures up images of a 1970s style a
ps. for name change send a DM to a moderator like Achenar, dBlue or taktik. Iām sure they can help you.
1 Like
At the time of writing there is still 16+ hours left. So get things moving if you donāt want to miss the deadline!
Thanks for the feedback!
Once I knew what I wanted to do, not that long, but it was still an investment of about 3-4 hours. Then I just hammered away at the composition about an hour a day for a week. - ĶĢ š„š¼šš ĶĢ- in the Discord showed me the extent to which you could push single-cycle waveforms, and my first attempt featured them, but I wasnāt feeling like I was learning anything on my own, so I abandoned that to focus on taking the contest rules to their most absurd extreme.
With the modulation window, you can almost shape any sound into what you want or at least get it within range. With the phrase editor, you can chop any sample down to 256 parts, change the pitch, and reorder them. You can even get single-cycle waveforms without using slice markers that way. I figured with that much flexibility I could just build a toolkit from one sample and go from there. Thanks go to MrZensphere for the granular synthesis video. That was a huge inspiration.
The macro setup puts a vice grip on what you can and canāt do per line. It really forces you to think about composition. I canāt wait to use it again under different contexts.
Since I didnāt post the stats before. They are 46.829% disk space and 324kb for the .xrni.
2 Likes
The competition is now officially closed. Time to rank the entries in this thread here:
Anyone can vote so join in!